You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Home > Technical data > Lamp+ datasheet
Lamp+ datasheet
print icon

Specifications

  • Height 33 cm, diameter 22 cm, weight 7 kg
  • Distance lens to table surface: 95 cm
  • Projection area: 70 x 40 cm 
  • Minimum table size: 100 x 70 cm (room requirements)
  • Operating system: ABUSIZZ MonteRosaOS
  • ABUSIZZ® Haptic Touch Technology™
  • Projection: FullHD with 1400 ANSI lumens
  • Screen Sharing: Airplay, Chromecast, Miracast
  • Audio: 360 Grad
  • Direct light: 500 lux on table surface / 4000 K 
  • Indirect light: 4000 K 
  • External light control: DALI
  • Power consumption: 200W (230VAC 50Hz)
  • Network: LAN / WIFI (network requirements)

 

Connections

 

The electrical connection of the Lamp+ is made via a 5-core mains cable, L / N / PE (brown, blue, yellow) with constant current. The light function can be controlled via DALI protocol (grey, black) - on, off, dimming. The LAN connection is via a LAN outlet on the ceiling. 

Lighting

  • Scheme 1: One Lamp+ is enough to illuminate a table surface of 130cm x 130cm.
  • Scheme 2: With a table length of 130 cm or more, at least two Lamp+ should be used.
  • Illuminance: Is given in lux and is measured on the table surface. A guideline value of 500 lux must be observed for workplace lighting.

Installation overview

  • The mounting plate is first mounted on the ceiling (ceiling preparation ).
  • The Lamp+ is connected to the mounting kit using an aluminum tube and two bayonet locks. 

 

Controls

Power Button: Short press to turn on/off interactive projection. The start-up process takes about 40s, the LED lights up during the start-up process.

 

Light Button: Short press to turn on/off the light. Long press to dim.

Feedback
2 out of 2 found this helpful

ABUSIZZ AG ©
scroll to top icon